More Than A Friend

"More Than A Friend"

Hello Friends! Lets get creative and create some cards using the best products in the crafting industry. Once finished I can guarantee a wave of pride and happiness coming your way, so let's not delay and get started.

Heartfelt creations Products:

Simply Classic Rectangle Frame DieHCD2-7383

Clematis DieHCD1-7355

Clematis Cling Stamp SetHCPC-3954

Floral Banners Paper CollectionHCDP1-2133

Floral Shoppe Fillers Cling Stamp SetHCPC-3933

Floral Shoppe Fillers DieHCD1-7331

Holly Berry Spray Cling Stamp SetHCPC-3959

Holly Berry Spray DieHCD1-7360

Leafy Accents Cling Stamp SetHCPC-3835

Leafy Accents DieHCD1-7193

3D Leafy Accents Shaping MoldHCFB1-467

For My Friend Sentiments Cling Stamp SetHCPC-3844

Deluxe Flower Shaping Paper Pack of 50 - WhiteHCPP1-475

Deluxe Flower Shaping KitHCST1-401

Rajni Chawla's Crystal ClearPGM15015

Designer Dries Clear Adhesive159723

For more tips on creating with Heartfelt Creations dies, watch YouTube tutorials from the link below

Simple Classic Rectangle Frame Die

How to create the Climbing Clematis & layer them on a Decorative Card

Other Products Archival Ink Seafarer, Pink Peony, Leaf Green, Coffee, White card stock, Gold Cardstock, Brown Cardstock, Trimmer, Glossy accent, Gold Rock candy stamens, Score Board, Hot Glue Gun, Foam Tape, Scissor. 

Instructions: Ready tent fold card measuring 5.5" × 7.5". Take a piece of white cardstock measuring 11" × 7.5", score on 5.5". Fold along the score lines and create a tent fold card base. Mat with brown and white cardstock, then designer paper (a slight shade of pink peony archival ink has been used), adhere with dimensional tape. All mat paper should be 2/8” smaller than the bottom. Glue golden and blue pattern paper (shaded with pink pony) inside the card which is 2/8” smaller than the card base.

Further cut 2 white and 2 gold decorative frames using die No. 4. To create a longer decorative frame cut paper a little longer than your target length. Placing your die at one end of the paper. Place your cutting plates so that they cover only the portion you want to cut. Run through the die cutting machine. Reposition the die so it is lined up with the original cut portion. Place the cutting plate so only the portion you want to cut will cut through the paper. (The original size of the frame is approx. 4” but with this step the actual length of your final cut will be 5.5” approximately)

Create 2 designer frames with all die cut. Slightly off set. Glue all pieces on top and inside of the card using dimensional tape as pictured.

Cut a strip of vellum paper, 1 1/8" wide. Stamp sentiment cling stamp set HCPC-3344 with embossing ink and heat set using golden embossing powder. Apply pink peony ink from back. Glue strip with golden and white mat as pictured.    

Stamp Clematis flower on deluxe flower shaping paper with embossing ink and heat set using white embossing powder. Color with Seafarer archival ink. Color some small flowers with pink peony for buds and cut with coordinating dies. Stamp smallest Clematis with leaf green and cut with coordinating die. Mist with water and Shape them using ball tool. Pierce the center of flower. Add Golden Rock candy stamens. Create 3 pink and 3 blue buds as pictured. Stamp leaves from Leafy Accents stamp with leaf green. Stamp Floral Shoppe Fillers stamp using leaf green and pink peony ink. Also stamp some leaves from Holly Berry stamp using Coffee archival ink. Cut leaves with their coordinating dies. Cut some golden leaves using Floral Shoppe Fillers die too.

Arrange flowers and leaves on card using hot melted glue. For a finishing look, apply Rajni Chawla Crystal Clear on flowers and leaves using designer dries clear adhesive.

Arrange flowers, buds and leaves on card in the desired manner and glue them using hot melted glue

Enjoy the pictures attached below.

I hope you enjoyed the tutorial.

Thanks for stopping by

Hugs

Madhu Bairoliya.

Blog: https://thecraftplanet1.blogspot.com/

Instagram: https://www.instagram.com/madhu.bairoliya/

Facebook: https://www.facebook.com/craftplanet1

You Tube: https://www.youtube.com/channel/UC9wvBSioU9AyVN_INLcTk9g

Light up the Darkness!!

Light up the Darkness!!

Hello friends!
Today I am here with step wise tutorial for a beautiful home decor lantern. 

"Learn to light a candle in the darkest moments of someone’s life. Be the light that helps others see; it is what gives life its deepest significance."

Heartfelt Creations products has been used:

Rounded Lattice Window Die, HCD1-7274
Rounded Sunlight Window Die, HCD1-7272

Wild Aster Die, HCD1-7257

Wild Aster Cling Stamp Set, HCPC-3887

Cheery Pansy Die, HCD1-7222

Cheery Pansy Cling Stamp Set, HCPC-3862

3D Pansy Shaping Mold, HCFB1-473

Small Sweet Peony Die, HCD1-7173

Small Sweet Peony Cling Stamp Set, HCPC-3819
Leafy Accents Die, HCD1-7193

Leafy Accents Cling Stamp Set, HCPC-3835

3D Leafy Accents Shaping Mold, HCFB1-467

Rajni Chawla's Crystal Clear, PGM15015

Deluxe Flower Shaping Kit, HCST1-401

Product can buy:

USA   Heartfelt Creations

India  Crafters Corner

Icraft: flower shaping paper

Other Products: Dress my craft white card stock , ICRAFT flower shaping paper, DMC micro mini pearls beads, hot gluegun, hotglue, Dries clear glue, vellum sheets, red tacky tape, stamens- thread and wire, crystal clear glitter, sparkling dust.

Ink: Archival- plum, cactus flower, rose madder, tea rose, vivid chartreuse, leaf green, library green, pale ochre, Memento- lilac posies, pink peony , rose madder, stazon- olive green.

Instructions:-

Step 1: Take 2 pieces of 6x6 300 gsm DMC white cardstock and vellum sheets. Cut circle using Rounded sunlight window die. As shown in picture.

Step 2: Cut white circle cardstock using both designers die from Rounded Lattice Window die. As pictured.

Step 3: Take 2 strips of white cardstock measure 3 ¼” x 12”. join both 

with the help of red tape. See in the picture.

Step 4: Now cut the fringes with the help of fringes scissor or normal scissor.

Step 5: Now cut design using Elegant Pocket Accents die at side of the lantern. As pictured.

Step 6: Now adhere vellum circles at the back of the doilies using red tape. As pictured.

Step 7: Adhere vellum back of the side strip with clear glue. As pictured.

Step 8: Add magnets for closure.

 

Step 9: Attach decorative die cut strip fringes using clear glue with 1 doily by leaving 4” open. This is the flap to open the lantern and flame-less candle can be kept. Cut extra part of decorative strip. 

Step 10: Before adhering second doily, first check magnets closure working fine or not.

Step 11: Now adhere second doily. Magnet closure Lantern base is ready.

Like this create 2 lanterns. Distress the edges with memento Lilac posies.

Flowers:

For more tips on creating flowers with Sweet Peony collection, watch the tutorial https://youtu.be/L9_MLkvpGPQ

For more tips on creating with the flower shaping mold, watch the tutorial https://youtu.be/KDbdzC0MnAI

Maroon sweet peony flower: Stamps multiple flowers using small sweet peony stamp with archival plum ink. Cut with coordinating dies. Color using lilac posies and archival plum both sides. Add white thread stamens. Add glitter using dries clear glue. Create fillers with smallest petals and color using any yellow color. As pictured.

White Rose: Stamp multiple classic rose flowers using archival pale ochre. Cut with coordinating dies. Shape them using 3D shaping mold. create flowers. Add micro mini pearls using dries clear glue. Add glitters using dries clear glue.

Maroon roses: Stamp multiple classic rose flowers using archival plum. Cut with coordinating dies. Color with lilac posies, plum and cactus flower. Shape them using 3D shaping mold. create roses. Add glitter using dries clear glue. Now add micro mini pearls on tip also. Add glitters using dries clear glue.

Create two Small roses for fillers with small flower from classic rose. Color with Rose madder and tea rose archival ink. Create fillers using any smallest flower from any die cut. Color with any shade. Add wire stamens.

Wild Aster: Stamp wild aster flowers multiple times using archival vivid chartreuse and color with same. Cut with coordinating dies. Turn the flowers face up and using a ball tool, make circles in the center of the flower to curl the petals into an arch shape. Adhere 3 petals together using the clear glue, offsetting the petals to create a fuller flower add one inward flower like ball. As shown. 

Create one flower with 2 medium petals and add one inward curl petal. Create medium flower using medium petals off set. Take 6mm Styrofoam bud color with plum add with white and yellow thread stamens. Create buds with small petals and Pierce a hole through the centers, add mini pointed green thread stamen through, attaching with hot glue. As pictured. Add crystal clear glitter using dries clear glue.

Stamp the leaves from the leafy accents cling stamp set using archival Library green and color using peeled paint and library green. Stamp Pansy stamp using stazon olive green colur with same and leaf green and give touch of cactus flower archival ink. Cut with coordinating die. Shape the leaves using the 3D Shaping mold. Add glitters using dries clear glue.

When all the elements are ready decorate both lantern from both side in desire manner with hot glue. As pictured

 

I hope you enjoyed the tutorial. love to here from you.

Thanks for stopping by

Hugs

Madhu Bairoliya.

DogWood Love Roses

DogWood love Roses!

HC products used:

Flowering Dogwood Die, HCD1-7129

Flowering Dogwood Cling Stamp Set, HCPC-3773

Leafy Accents Die, HCD1-7193

Leafy Accents Cling Stamp Set, HCPC-3835

3D Leafy Accents Shaping Mold, HCFB1-467

Eyelet Oval Die,  HCD1-776

Classic Wedding Bells Die, HCD1-7143

Classic Wedding Bells Cling Stamp Set, HCPC-3789

Decorative Oval Die , HCD1-762

Deluxe Flower Shaping Kit, HCST1-401

Rajni Chawla's Crystal Clear, PGM15015

Products can be buy...

USA : Heartfelt Creations
INDIA Crafters Corner

Other Products: White card stock, Glitter hot glue, dries clear glue, wire stamens, 

Instructions: 6x6 tent fold card. 

Score front panel from back at every 1/2" interval and create background.  Distress The edges with archival cactus flower. Stamp image using Classic Wedding Bells Cling Stamp Set and cut with coordinating die . color using Zig marker brush pen. Stamp the dogwood flowers using archival ink Plum color with magenta hue and cactus flower. Shape them using deluxe shaping kit ball tools. Create big rose using small to big petals. Create small flower and bud too. Stamp leaves using leafy accent stamp with library green and color with memento Bamboo Leaves and archival leaf green and cactus flower. Shape them using 3D leafy accent shaping mold. Now adhere both Oval die cuts as pictured. Arrange the flowers and leaves with hot glue. add sentiment in 3D look with hot glue. Add glitters using dries clear glue.

some more pictures bellow...

Thanks for stopping by..

Hugs

Madhu Biroliya

Beauty In the simple things!

Beauty in the simple things!

 Hi friends!

I am here with another pink card with hand created backgrond.

HC products used:

Leafy Accents Die, HCD1-7193
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467

Rounded Window Frame Die, HCD1-727

Sweet Peony Paper Collection, HCDP1-288
Small Sweet Peony Die, HCD1-7173
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Cling Stamp Set, HCPC-3820

Other Products: white cardstock, white and pink stamens, glitter, hotglue, dries clear glue, white satin twin, 3Dfoam tape, score board, 

Inks: Archival..Vibrant Fushia, Library Green, Leaf Green, Rose Madder, memento Lilac Posie.

Products can be buy from

USA   Heartfelt Creations

India  Crafters Corner

For more tips on creating flowers with Sweet Peony collection, watch the tutorial
https://youtu.be/L9_MLkvpGPQ

For more tips on creating with the flower shaping molds, watch the tutorial
https://youtu.be/KDbdzC0MnAl

Instruction: Ready card size 6x6 tent fold card. 

Score front panel from back vertically, horizontally, Diagonally and some straight lines to create background. cut doily using Rounded Window Frame 2nd big die adhere on card base with 3D foam tape. Distress The edges with memento Lilac Posies as pictured.

Flower instruction……To create  peonies, stamp the images with vibrant Fushia archival ink using 'Sweet Peony stamp set. Cut the flowers with it's coordinating die. You will need 1 big flower using 4 big flower petals, for 1 small flower 3 medium small flower petals. Color with rose madder archival ink and used shaping mold.  Glue the layers with 'Aleen’s Fast Grab Glue' and set it aside for a minute. Prick a hole in the center of the flowers. Take white rock candy stamens for big flower and pink rock candy stamens for small flowers. Hold them in the center and wind a thread wire around the center of the stamens. Hold them tight and screw the wire and pass the bunch through the whole. Glue them tight using hot glue. Cut the threads of the stamens at the back and add a green color sepal made using 'Classic Sunflower Die' at the back of the flower. 

Leaves stamped with Archival library green and cut with coordinating die. Used dabber n dab with leaf green shape with shape using3D shaping mold. Adhere flowers and leaves using hot glue. Add only smallest net die cut using Rounded Window Frame die. Glue twin bow. Add glitter using dries clear glue and sentiment with foam tape.

Thanks for stopping by..

Loves and Hugs

Madhu Bairoliya